Anisotropy of T2 and T1ρ relaxation time in articular cartilage at 3 T.

PURPOSE: The anisotropy of R2 and R1ρ relaxation rates in articular cartilage contains information about the collagenous structure of the tissue. Here we determine and study the anisotropic and isotropic components of T2 and T1ρ relaxation parameters in articular cartilage with a clinical 3T MRI device. Furthermore, a visual representation of the topographical variation in anisotropy is given via anisotropy mapping. METHODS: Eight bovine stifle joints were imaged at 22 orientations with respect to the main magnetic field using T2, continuous-wave (CW) T1ρ, and adiabatic T1ρ mapping sequences. Relaxation rates were separated into isotropic and anisotropic relaxation components using a previously established relaxation anisotropy model. Pixel-wise anisotropy values were determined from the relaxation-time maps using Michelson contrast. RESULTS: The relaxation rates obtained from the samples displayed notable variation depending on the sample orientation, magnetization preparation, and cartilage layer. R2 demonstrated significant anisotropy, whereas CW-R1ρ (300 Hz) and CW-R1ρ (500 Hz) displayed a low degree of anisotropy. Adiabatic R1ρ was largely isotropic. In the deep cartilage regions, relaxation rates were generally faster and more anisotropic than in the cartilage closer to the tissue surface. The isotropic relaxation rate components were found to have similar values regardless of measurement sequence. CONCLUSIONS: The fitted relaxation model for T2 and T1ρ demonstrated varying amounts anisotropy, depending on magnetization preparation, and studied the articular cartilage layer. Anisotropy mapping of full joints showed varying amounts of anisotropy depending on the quantitative MRI parameter and topographical location, and in the case of T2, showed systematic changes in anisotropy across cartilage depth.

Effects of Bariatric Surgery on Knee Articular Cartilage and Osteoarthritis Symptoms-A 12-Month Follow-Up Using T2 Relaxation Time and WOMAC Osteoarthritis Index.

BACKGROUND: Obesity is a significant risk factor for osteoarthritis (OA). The most effective treatment for morbid obesity is bariatric surgery. PURPOSE: To study the effects of potential surgically induced weight loss on knee articular cartilage and OA symptoms of obese patients over a 12-month follow-up. STUDY TYPE: Prospective longitudinal cohort study. SUBJECTS: 45 obese patients (38 female, BMI = 42.3 ± 6.5 kg/m2) who underwent gastric bypass (intervention group), and 46 age-matched conservative-care controls (37 female, BMI = 39.8 ± 4.6 kg/m2). FIELD STRENGTH/SEQUENCE: Multiecho spin echo sequence at 3 T. ASSESSMENT: Knee cartilage T2 measurements and WOMAC Indices were measured presurgery and after 12 months. The intervention group was split into successful (≥20% total weight loss (TWL)) and unsuccessful (<20% TWL) weight loss groups. T2 and WOMAC indices were also measured in controls at baseline and after 12 months. Changes among the three groups were analyzed. STATISTICAL TESTS: Analysis of variance (significance level 0.05). RESULTS: Twenty-six (58%) intervention patients achieved ≥20% TWL. The <20% TWL group demonstrated significantly more T2 reduction in the deep lateral femur over 12 months compared with the ≥20% TWL group (-3.83 ± 8.18 msec vs. 2.47 ± 6.54 msec, respectively), whereas no significant differences were observed on the medial femoral compartment (P = 0.385, P = 0.551, and P = 0.511 for bulk, superficial and deep regions, respectively). Changes in WOMAC indices over 12 months were significantly greater in the ≥20% TWL group compared with controls. In the <20% TWL group, pain significantly improved over 12 months compared with controls, while stiffness and function changes were not statistically significant (P = 0.063 and P = 0.051, respectively). DATA CONCLUSION: Cartilage matrix, measured by T2, showed improvement on lateral femoral cartilage with <20% TWL compared with ≥20% TWL. Bariatric surgery provided significant improvements in knee symptoms with ≥20% TWL compared with conservative WL. This effect is also seen to some extent with <20% TWL compared with conservative WL. LEVEL OF EVIDENCE: 2 TECHNICAL EFFICACY: Stage 4.

Real-Time Tissue Classification Using a Novel Optical Needle Probe for Biopsy.

Core needle biopsy is a part of the histopathological process, which is required for cancerous tissue examination. The most common method to guide the needle inside of the body is ultrasound screening, which in greater part is also the only guidance method. Ultrasound screening requires user experience. Furthermore, patient involuntary movements such as breathing might introduce artifacts and blur the screen. Optically enhanced core needle biopsy probe could potentially aid interventional radiologists during this procedure, providing real-time information on tissue properties close to the needle tip, while it is advancing inside of the body. In this study, we used diffuse optical spectroscopy in a custom-made core needle probe for real-time tissue classification. Our aim was to provide initial characteristics of the smart needle probe in the differentiation of tissues and validate the basic purpose of the probe of informing about breaking into a desired organ. We collected optical spectra from rat blood, fat, heart, kidney, liver, lungs, and muscle tissues. Gathered data were analyzed for feature extraction and evaluation of two machine learning-based classifiers: support vector machine and k-nearest neighbors. Their performances on training data were compared using subject-independent k-fold cross-validation. The best classifier model was chosen and its feasibility for real-time automated tissue recognition and classification was then evaluated. The final model reached nearly 80% of correct real-time classification of rat organs when using the needle probe during real-time classification.

Regular Running Is Related to the Knee Joint Cartilage Structure in Healthy Adults.

PURPOSE: The purpose of this study was to determine whether regular running distance and biomechanics are related to medial central femur cartilage (MCFC) structure. METHODS: The cross-sectional study sample consisted of 1164 runners and nonrunners aged 18-65 yr. Participants completed questionnaires on physical activity and their running history. We performed quantitative magnetic resonance imaging of knee cartilage-T2 relaxation time (T2) mapping (high T2 indicates cartilage degeneration)-and a running biomechanical analysis using a three-dimensional motion capture system. A 14-d monitoring of the physical activity was conducted. RESULTS: Those aged 35-49 yr were at 84% higher odds of having MCFC T2 in the highest level (85th percentile, P < 0.05) compared with youngest adults indicating that MCFC structures may be altered with aging. Being male was associated with 34% lower odds of having T2 at the highest level ( P < 0.05) compared with females. Nonrunners and runners with the highest weekly running distance were more likely to have a high T2 compared with runners with running distance of 6-20 km·wk -1 ( P < 0.05). In addition, the maximal knee internal adduction moment was associated with a 19% lower odds of having T2 at the highest level ( P < 0.05). CONCLUSIONS: Females compared with males and a middle-aged cohort compared with the younger cohort seemed to be associated with the degeneration of MCFC structures. Runners who ran 6-20 km·wk -1 were associated with a higher quality of their MCFC compared with highly active individuals and nonrunners. Knee frontal plane biomechanics was related to MCFC structure indicating a possibility of modifying the medial knee collagen fibril network through regular running.

If you can make it, you can share it - Perspectives on the first DIY-fair at the European congress of medical physics (ECMP, DUBLIN 2022).

The medical physics and engineering community is known for being active in conjuring do-it-yourself (DIY) -solutions to support their clinical and research work. To facilitate the exchange of solutions and ideas, a DIY-fair was held for the first time at the European Congress of Medical Physics (ECMP) in August 2022 in Dublin, Ireland. Altogether 32 contributions were presented, consisting of software, scripts, 3D-printed customized solutions, devices, gadgets and phantoms. All contributions were published in video format on a dedicated YouTube channel, and most were also presented in person at the conference. The fair demonstrated that there is an unmet need for sharing and distributing information on self-created solutions in the medical physics community. The authors propose the creation of a dedicated platform for sharing such content within our community, as well as a continuity of DIY-fairs at future ECMP meetings.

Melting of aqueous NaCl solutions in porous materials: shifted phase transition distribution (SIDI) approach for determining NMR cryoporometry pore size distributions.

Nuclear magnetic resonance cryoporometry (NMRC) and differential scanning calorimetry thermoporometry (DSC-TPM) are powerful methods for measuring mesopore size distributions. The methods are based on the fact that, according to the Gibbs-Thomson equation, the melting point depression of a liquid confined to a pore is inversely proportional to the pore size. However, aqueous salt solutions, which inherently exist in a broad range of biological porous materials as well as technological applications such as electrolytes, do not melt at a single temperature. This causes artefacts in the pore size distributions extracted by traditional Gibbs-Thomson analysis of NMRC and DSC-TPM data. Bulk aqueous NaCl solutions are known to have a broad distribution of melting points between the eutectic and pure water phase transition points (252-273 K). Here, we hypothesize that, when aqueous NaCl solution (saline) is confined to a small pore, the whole melting point distribution is shifted toward lower temperatures by the value predicted by the Gibbs-Thomson equation. We show that this so-called shifted phase transition distribution (SIDI) approach removes the artefacts arising from the traditional Gibbs-Thomson analysis and gives correct pore size distributions for saline saturated mesoporous silica gel and controlled pore materials analyzed by NMR cryoporometry. Furthermore, we demonstrate that the method can be used for determining pore sizes in collagen-chondroitin sulphate hydrogels resembling the composition of the extracellular matrix of articular cartilage. It is straightforward to apply the SIDI analysis for DSC-TMP data as well.

X-ray scatter in projection radiography.

Projection radiography is the most common radiological modality, and radiation safety of it concerns both radiation workers and the public. We measured and generated a series of scattered radiation maps for projection radiography and estimated effective doses of the supporting person during exposure. Measured adult patient protocols included chest posterior-anterior, chest lateral, pelvis anterior-posterior (AP), abdomen AP and bedside chest AP. Maps concretise spatial distribution and the scattered radiation dose rates in different imaging protocols. Highest and lowest rates were measured in abdomen AP and bedside chest AP protocols, respectively. The effective dose of supporting person in abdomen AP examination at distance of 0.5 m was 300 nSv and in bedside supine chest AP examination at distance of 0.7 m was 0.5 nSv. The estimated annual effective dose of emergency unit radiographer was 0.11 mSv. The obtained effective dose values are small compared to annual dose limits of radiation workers and the public.

Deep learning enables time-efficient soft tissue enhancement in CBCT: Proof-of-concept study for dentomaxillofacial applications.

PURPOSE: The use of iterative and deep learning reconstruction methods, which would allow effective noise reduction, is limited in cone-beam computed tomography (CBCT). As a consequence, the visibility of soft tissues is limited with CBCT. The study aimed to improve this issue through time-efficient deep learning enhancement (DLE) methods. METHODS: Two DLE networks, UNIT and U-Net, were trained with simulated CBCT data. The performance of the networks was tested with three different test data sets. The quantitative evaluation measured the structural similarity index measure (SSIM) and the peak signal-to-noise ratio (PSNR) of the DLE reconstructions with respect to the ground truth iterative reconstruction method. In the second assessment, a dentomaxillofacial radiologist assessed the resolution of hard tissue structures, visibility of soft tissues, and overall image quality of real patient data using the Likert scale. Finally, the technical image quality was determined using modulation transfer function, noise power spectrum, and noise magnitude analyses. RESULTS: The study demonstrated that deep learning CBCT denoising is feasible and time efficient. The DLE methods, trained with simulated CBCT data, generalized well, and DLE provided quantitatively (SSIM/PSNR) and visually similar noise-reduction as conventional IR, but with faster processing time. The DLE methods improved soft tissue visibility compared to the conventional Feldkamp-Davis-Kress (FDK) algorithm through noise reduction. However, in hard tissue quantification tasks, the radiologist preferred the FDK over the DLE methods. CONCLUSION: Post-reconstruction DLE allowed feasible reconstruction times while yielding improvements in soft tissue visibility in each dataset.

Assessment of articular cartilage of ankle joint in stable and unstable unilateral weber type-B/SER-type ankle fractures shortly after trauma using T2 relaxation time.

Background: Early detection of post-traumatic cartilage damage in the ankle joint in magnetic resonance images can be difficult due to disturbances to structures usually appearing over time. Purpose: To study the articular cartilage of unilateral Weber type-B/SER-type ankle fractures shortly post-trauma using T2 relaxation time. Material and Methods: Fifty one fractured ankles were gathered from consecutively screened patients, compiled initially for RCT studies, and treated at Oulu University Hospital and classified as stable (n = 28) and unstable fractures (n = 23) based on external-rotation stress test: medial clear space of ≥5 mm was interpreted as unstable. A control group of healthy young individuals (n = 19) was also gathered. All ankles were imaged on average 9 (range: 1 to 25) days after injury on a 3.0T MRI unit for T2 relaxation time assessment, and the cartilage was divided into sub-regions for comparison. Results: Control group displayed significantly higher T2 values in tibial cartilage compared to stable (six out of nine regions, p-values = .003-.043) and unstable (six out of nine regions, p-values = .001-.037) ankle fractures. No differences were detected in talar cartilage. Also, no differences were observed between stable and unstable fractures in tibial or talar cartilage. Conclusions: Lower T2 relaxation times of tibial cartilage in fractured ankles suggest intact extra cellular matrix (ECM) of the cartilage. Severity of the ankle fracture, measured by ankle stability, does not seem to increase ECM degradation immediately after trauma.

Effect of Footwear Type on Biomechanical Risk Factors for Knee Osteoarthritis.

Background: Regular walking in different types of footwear may increase the mediolateral shear force, knee adduction moment, or vertical ground-reaction forces that could increase the risk of early development of knee osteoarthritis (OA). Purpose: To compare kinematic and kinetic parameters that could affect the development of knee OA in 3 footwear conditions. Study Design: Controlled laboratory study. Methods: A total of 40 asymptomatic participants performed walking trials in the laboratory at self-selected walking speeds under barefoot (BF), minimalistic (MF), and neutral (NF) footwear conditions. Knee joint parameters were described using discrete point values, and continuous curves were evaluated using statistical parametric mapping. A 3 × 1 repeated-measures analysis of variance was used to determine the main effect of footwear for both discrete and continuous data. To compare differences between footwear conditions, a post hoc paired t test was used. Results: Discrete point analyses showed a significantly greater knee power in NF compared with MF and BF in the weight absorption phase (P < .001 for both). Statistical parametric mapping analysis indicated a significantly greater knee angle in the sagittal plane at the end of the propulsive phase in BF compared with NF and MF (P = .043). Knee joint moment was significantly greater in the propulsive phase for the sagittal (P = .038) and frontal planes (P = .035) in BF compared with NF and MF and in the absorption phase in the sagittal plane (P = .034) in BF compared with MF and NF. A significant main effect of footwear was found for anteroposterior (propulsion, ↑MF, NF, ↓BF [P = .008]; absorption, ↑BF, MF, ↓NF [P = .001]), mediolateral (propulsion, ↑MF, NF, ↓BF [P = .005]; absorption, ↑NF, MF, ↓BF [P = .044]), and vertical (propulsion, ↑NF, BF, ↓MF [P = .001]; absorption, ↑MF, BF, ↓NF [P < .001]) ground-reaction forces. Knee power showed a significant main effect of footwear (absorption, ↑NF, MF, ↓BF [P = .015]; propulsion, ↑MF, NF, ↓BF [P = .039]). Conclusion: Walking in MF without sufficient accommodation affected kinetic and kinematic parameters and could increase the risk of early development of knee OA.

SPICY: a method for single scan rotating frame relaxometry.

T 1ρ is an NMR relaxation mode that is sensitive to low frequency molecular motions, making it an especially valuable tool in biomolecular research. Here, we introduce a new method, SPICY, for measuring T1ρ relaxation times. In contrast to conventional T1ρ experiments, in which the sequence is repeated many times to determine the T1ρ time, the SPICY sequence allows determination of T1ρ within a single scan, shortening the experiment time remarkably. We demonstrate the method using 1H T1ρ relaxation dispersion experiments. Additionally, we combine the sequence with spatial encoding to produce 1D images in a single scan. We show that T1ρ relaxation times obtained using the single scan approach are in good agreement with those obtained using the traditional experiments.

Assessing post-traumatic changes in cartilage using T1ρ dispersion parameters.

Degeneration of cartilage can be studied non-invasively with quantitative MRI. A promising parameter for detecting early osteoarthritis in articular cartilage is T1ρ, which can be tuned via the amplitude of the spin-lock pulse. By measuring T1ρ at several spin-lock amplitudes, the dispersion of T1ρ is obtained. The aim of this study is to find out if the dispersion contains diagnostically relevant information complementary to a T1ρ measurement at a single spin-lock amplitude. To this end, five differently acquired dispersion parameters are utilized; A, B, τc, T1ρ/T2, and R2 - R1ρ. An open dataset of an equine model of post-traumatic cartilage was utilized to assess the T1ρ dispersion parameters for the evaluation of cartilage degeneration. Firstly, the parameters were compared for their sensitivity in detecting degenerative changes. Secondly, the relationship of the dispersion parameters to histological and biomechanical reference parameters was studied. Parameters A, T1ρ/T2, and R2 - R1ρ were found to be sensitive to lesion-induced changes in the cartilage within sample. Strong correlations of several dispersion parameters with optical density, as well as with collagen fibril angle were found. Most of the dispersion parameters correlated strongly with individual T1ρ values. The results suggest that dispersion parameters can in some cases provide a more accurate description of the biochemical composition of cartilage as compared to conventional MRI parameters. However, in most cases the information given by the dispersion parameters is more of a refinement than complementary to conventional quantitative MRI.

Effects of a 360° virtual counselling environment on patient anxiety and CCTA process time: A randomised controlled trial.

INTRODUCTION: This study investigated whether a 360° virtual counselling environment (360°VCE) was more effective at decreasing patients' anxiety than routine standard of care counselling for patients undergoing coronary computed tomography angiography (CCTA), and if there was any difference in the process times for both of these groups. METHODS: A total of 86 patients underwent CCTA in this randomised controlled trial. Patients were randomly assigned to intervention and control groups. The 360°VCE was developed using spherical panoramic images and non-immersive 360° technology. The primary outcome, anxiety, was measured using the State-Trait Anxiety Inventory (STAI). The secondary outcome, CCTA process time, was measured from the time of arrival in the department until end of examination. RESULTS: Pre-scan anxiety was lower among patients in the 360°VCE group immediately before CCTA in comparison to patients in the control group (p = 0.015). Women demonstrated higher levels of anxiety than men in both groups. No between-group differences were discerned in CCTA process time. CONCLUSION: Access to 360°VCE can reduce patients' pre-CCTA anxiety levels. IMPLICATIONS FOR PRACTICE: The presented results can be used to improve patient counselling and care, reduce anxiety among patients undergoing CCTA, and optimise the CCTA examination procedure.

Deep-Learning-Based Contrast Synthesis From MRF Parameter Maps in the Knee Joint.

BACKGROUND: Magnetic resonance fingerprinting (MRF) is a method to speed up acquisition of quantitative MRI data. However, MRF does not usually produce contrast-weighted images that are required by radiologists, limiting reachable total scan time improvement. Contrast synthesis from MRF could significantly decrease the imaging time. PURPOSE: To improve clinical utility of MRF by synthesizing contrast-weighted MR images from the quantitative data provided by MRF, using U-nets that were trained for the synthesis task utilizing L1- and perceptual loss functions, and their combinations. STUDY TYPE: Retrospective. POPULATION: Knee joint MRI data from 184 subjects from Northern Finland 1986 Birth Cohort (ages 33-35, gender distribution not available). FIELD STRENGTH AND SEQUENCE: A 3 T, multislice-MRF, proton density (PD)-weighted 3D-SPACE (sampling perfection with application optimized contrasts using different flip angle evolution), fat-saturated T2-weighted 3D-space, water-excited double echo steady state (DESS). ASSESSMENT: Data were divided into training, validation, test, and radiologist's assessment sets in the following way: 136 subjects to training, 3 for validation, 3 for testing, and 42 for radiologist's assessment. The synthetic and target images were evaluated using 5-point Likert scale by two musculoskeletal radiologists blinded and with quantitative error metrics. STATISTICAL TESTS: Friedman's test accompanied with post hoc Wilcoxon signed-rank test and intraclass correlation coefficient. The statistical cutoff P <0.05 adjusted by Bonferroni correction as necessary was utilized. RESULTS: The networks trained in the study could synthesize conventional images with high image quality (Likert scores 3-4 on a 5-point scale). Qualitatively, the best synthetic images were produced with combination of L1- and perceptual loss functions and perceptual loss alone, while L1-loss alone led to significantly poorer image quality (Likert scores below 3). The interreader and intrareader agreement were high (0.80 and 0.92, respectively) and significant. However, quantitative image quality metrics indicated best performance for the pure L1-loss. DATA CONCLUSION: Synthesizing high-quality contrast-weighted images from MRF data using deep learning is feasible. However, more studies are needed to validate the diagnostic accuracy of these synthetic images. EVIDENCE LEVEL: 4. TECHNICAL EFFICACY: Stage 1.

Machine Learning Prediction of Collagen Fiber Orientation and Proteoglycan Content From Multiparametric Quantitative MRI in Articular Cartilage.

BACKGROUND: Machine learning models trained with multiparametric quantitative MRIs (qMRIs) have the potential to provide valuable information about the structural composition of articular cartilage. PURPOSE: To study the performance and feasibility of machine learning models combined with qMRIs for noninvasive assessment of collagen fiber orientation and proteoglycan content. STUDY TYPE: Retrospective, animal model. ANIMAL MODEL: An open-source single slice MRI dataset obtained from 20 samples of 10 Shetland ponies (seven with surgically induced cartilage lesions followed by treatment and three healthy controls) yielded to 1600 data points, including 10% for test and 90% for train validation. FIELD STRENGTH/SEQUENCE: A 9.4 T MRI scanner/qMRI sequences: T1 , T2 , adiabatic T1ρ and T2ρ , continuous-wave T1ρ and relaxation along a fictitious field (TRAFF ) maps. ASSESSMENT: Five machine learning regression models were developed: random forest (RF), support vector regression (SVR), gradient boosting (GB), multilayer perceptron (MLP), and Gaussian process regression (GPR). A nested cross-validation was used for performance evaluation. For reference, proteoglycan content and collagen fiber orientation were determined by quantitative histology from digital densitometry (DD) and polarized light microscopy (PLM), respectively. STATISTICAL TESTS: Normality was tested using Shapiro-Wilk test, and association between predicted and measured values was evaluated using Spearman's Rho test. A P-value of 0.05 was considered as the limit of statistical significance. RESULTS: Four out of the five models (RF, GB, MLP, and GPR) yielded high accuracy (R2  = 0.68-0.75 for PLM and 0.62-0.66 for DD), and strong significant correlations between the reference measurements and predicted cartilage matrix properties (Spearman's Rho = 0.72-0.88 for PLM and 0.61-0.83 for DD). GPR algorithm had the highest accuracy (R2  = 0.75 and 0.66) and lowest prediction-error (root mean squared [RMSE] = 1.34 and 2.55) for PLM and DD, respectively. DATA CONCLUSION: Multiparametric qMRIs in combination with regression models can determine cartilage compositional and structural features, with higher accuracy for collagen fiber orientation than proteoglycan content. EVIDENCE LEVEL: 2 TECHNICAL EFFICACY: Stage 2.

Myocardium Assessment by Relaxation along Fictitious Field, Extracellular Volume, Feature Tracking, and Myocardial Strain in Hypertensive Patients with Left Ventricular Hypertrophy.

Background: Previous research has shown impaired global longitudinal strain (GLS) and slightly elevated extracellular volume fraction (ECV) in hypertensive patients with left ventricular hypertrophy (HTN LVH). Up to now, only little attention has been paid to interactions between macromolecules and free water in hypertrophied myocardium. Purpose: To evaluate the feasibility of relaxation along a fictitious field with rank 2 (RAFF2) in HTN LVH patients. Study Type. Single institutional case control. Subjects: 9 HTN LVH (age, 69 ± 10 years) and 11 control subjects (age, 54 ± 12 years). Field Strength/Sequence. Relaxation time mapping (T 1, T 1ρ , and T RAFF2 with 11.8 µT maximum radio frequency field amplitude) was performed at 1.5 T using a Siemens Aera (Erlangen, Germany) scanner equipped with an 18-channel body array coil. Assessment. ECV was calculated using pre- and postcontrast T 1, and global strains parameters were assessed by Segment CMR (Medviso AB Co, Sweden). The parametric maps of T 1ρ and T RAFF2 were computed using a monoexponential model, while the Bloch-McConnell equations were solved numerically to model effect of the chemical exchange during radio frequency pulses. Statistical Tests. Parametric maps were averaged over myocardium for each subject to be used in statistical analysis. Kolmogorov-Smirnov was used as the normality test followed by Student's t-test and Pearson's correlation to determine the difference between the HTN LVH patients and controls along with Hedges' g effect size and the association between variables, respectively. Results: T RAFF2 decreased statistically (83 ± 2 ms vs 88 ± 6 ms, P < 0.031), and global longitudinal strain was impaired (GLS, -14 ± 3 vs - 18 ± 2, P < 0.002) in HTN LVH patients compared to the controls, respectively. Also, significant negative correlation was found between T RAFF2 and GLS (r = -0.53, P < 0.05). Data Conclusion. Our results suggest that T RAFF2 decrease in HTN LVH patients may be explained by gradual collagen accumulation which can be reflected in GLS changes. Most likely, it increases the water proton interactions and consequently decreases T RAFF2 before myocardial scarring.

Relaxation anisotropy of quantitative MRI parameters in biological tissues.

Quantitative MR relaxation parameters vary in the sensitivity to the orientation of the tissue in the magnetic field. In this study, the orientation dependence of multiple relaxation parameters was assessed in various tissues. Ex vivo samples of each tissue type were prepared either from bovine knee (tendon, cartilage) or mouse (brain, spinal cord, heart, kidney), and imaged at 9.4 T MRI with T1, T2, continuous wave (CW-) T1ρ, adiabatic T1ρ and T2ρ, and Relaxation along fictitious field (RAFF2-4) sequences at five different orientations with respect to the main magnetic field. Relaxation anisotropy of the measured parameters was quantified and compared. The highly ordered collagenous tissues, i.e. cartilage and tendon, presented the highest relaxation anisotropy for T2, CW-T1ρ with spin-lock power < 1 kHz, Ad-T2ρ and RAFF2-4. Maximally anisotropy was 75% in cartilage and 30% in tendon. T1 and adiabatic T1ρ did not exhibit observable anisotropy. In the other measured tissue types, anisotropy was overall less than 10% for all the parameters. The results confirm that highly ordered collagenous tissues have properties that induce very clearly observable relaxation anisotropy, whereas in other tissues the effect is not as prominent. Quantitative comparison of anisotropy of different relaxation parameters highlights the importance of sequence choice and design in MR imaging.

Dipolar Relaxation of Water Protons in the Vicinity of a Collagen-like Peptide.

Quantitative magnetic resonance imaging is one of the few available methods for noninvasive diagnosis of degenerative changes in articular cartilage. The clinical use of the imaging data is limited by the lack of a clear association between structural changes at the molecular level and the measured magnetic relaxation times. In anisotropic, collagen-containing tissues, such as articular cartilage, the orientation dependency of nuclear magnetic relaxation can obscure the content of the images. Conversely, if the molecular origin of the phenomenon would be better understood, it would provide opportunities for diagnostics as well as treatment planning of degenerative changes in these tissues. We study the magnitude and orientation dependence of the nuclear magnetic relaxation due to dipole-dipole coupling of water protons in anisotropic, collagenous structures. The water-collagen interactions are modeled with molecular dynamics simulations of a small collagen-like peptide dissolved in water. We find that in the vicinity of the collagen-like peptide, the dipolar relaxation of water hydrogen nuclei is anisotropic, which can result in orientation-dependent relaxation times if the water remains close to the peptide. However, the orientation-dependency of the relaxation is different from the commonly observed magic-angle phenomenon in articular cartilage MRI.

Three Professional Singers' Vocal Tract Dimensions in Operatic Singing, Kulning, and Edge-A Multiple Case Study Examining Loud Singing.

OBJECTIVE: A comprehensive understanding of how vocal tract dimensions vary among different types of loud voice productions has not yet been fully formed. This study aims to expand the existing knowledge on the topic. METHODS: Three trained professional singers together practiced the vocal techniques underlying Opera and Kulning singing styles for one hour and, afterwards, phonated using these techniques on vowel [iː] at pitch C5 (523 Hz), while their vocal tracts were scanned via MRI. One of the participants also produced the samples in the Edge vocal mode using [ɛː]. Several dimensional vocal tract measurements were calculated from the MRIs. Spectral analysis was conducted on the filtered audio recorded during the MRI. RESULTS: The Operatic technique demonstrated a lower larynx, a larger tongue-palate distance, and larger epilaryngeal and pharyngeal tube diameters compared to Kulning. Edge showed the highest laryngeal position, narrowest pharynx and epilarynx tubes, and the least forward-tilted larynx out of the styles studied. The spectra of Opera and Kulning showed a dominant first harmonic, while in Edge, the second harmonic was the strongest. CONCLUSIONS: The results shed light on the magnitude of vocal tract changes necessary for genre-typical vocal projection. This information can be pedagogically helpful.